The table below summarizes the various features found in each of the available configurations of RhinoCAM 2.0.
NOTE: RhinoCAM 2.0 is a plug-in that is completely integrated in Rhinoceros 4.0* and requires Rhinoceros 4.0 to be installed in order for it to run. It is not a standalone application. Also note that RhinoCAM 2.0 does not include Rhinoceros 4.0. It will have to be purchased separately.
*Rhinoceros 4.0 is a NURBS based 3D CAD modeler that can be used to create, edit, analyze, document, render, animate, and translate NURBS* curves, surfaces, and solids and polygon meshes. It supports the following file translators: DWG/DXF(AutoCAD 200x, 14, 13, and 12 ), IGES, SAT (ACIS), DGN, FBX, X_T (Parasolid), 3DS, LWO, STL, SLC, OBJ, AI, RIB, POV, UDO, VRML, BMP, TGA, CSV (export properties and hydrostatics), uncompressed TIFF, STEP, VDA, GHS, GTS, KML, PLY, SketchUP, SolidWorks.
For more information on Rhinoceros 4.0 go to▶ http://www.rhino3d.com
2-1/2 Axis Milling |
STD |
4th Axis |
PRO |
Pocketing |
|
|
|
Profiling |
|
|
|
Facing |
|
|
|
Engraving |
|
|
|
V-Carving |
|
|
|
V-Carve Roughing |
|
|
|
Chamfering |
|
|
|
Hole Making |
|
|
|
Thread Milling |
|
|
|
Re-Machining |
|
|
|
3 Axis Milling |
STD |
4th Axis |
PRO |
Horizontal Roughing |
|
|
|
Parallel Finishing |
|
|
|
Horizontal Finishing |
|
|
|
Radial Machining |
|
|
|
Spiral Machining |
|
|
|
Plunge Roughing |
|
|
|
Horizontal Re-roughing |
|
|
|
Plunge Re-roughing |
|
|
|
Projection Pocketing |
|
|
|
3D Offset Profiling |
|
|
|
3D Offset Pocketing |
|
|
|
Pencil Tracing |
|
|
|
Valley Re-Machining |
|
|
|
Plateau Machining |
|
|
|
Steep Area Parallel Machining |
|
|
|
Horizontal Hill Machining |
|
|
|
Curve Machining |
|
|
|
Between 2 Curves Machining |
|
|
|
Reverse Post Machining |
|
|
|
4 Axis Milling |
STD |
4th Axis |
PRO |
4 Axis Indexed Machining |
|
|
|
4 Axis Auto Multiple Indexing |
|
|
|
4 Axis Continuous Facing |
|
|
|
4 Axis Continuous Pocketing |
|
|
|
4 Axis Continuous Profiling |
|
|
|
4 Axis Continuous Engraving |
|
|
|
4 Axis Continuous Finishing |
|
|
|
4 Axis Continuous Roughing |
|
|
|
5 Axis Milling |
STD |
4th Axis |
PRO |
4 Axis Indexed Machining |
|
|
|
Hole Making |
STD |
4th Axis |
PRO |
Automatic Hole Selection, Sorting |
|
|
|
Drilling |
|
|
|
Tapping |
|
|
|
Boring |
|
|
|
Reverse Boring |
|
|
|
User Defined Cycles |
|
|
|
4 Axis Drilling |
|
|
|
4 Axis Tapping |
|
|
|
4 Axis Boring |
|
|
|
4 Axis Reverse Boring |
|
|
|
Toolpath Simulation |
STD |
4th Axis |
PRO |
Toolpath Animation |
|
|
|
Cut Material Simulation |
|
|
|
Advanced Cut Material Simulation |
|
|
|
Tools |
STD |
4th Axis |
PRO |
Standard Mill Tools (Ball, Flat, Corner Radius, V, Taper) |
|
|
|
Standard Drill Tools (Drill, Tap, Bore, Reverse Bore) |
|
|
|
Form Tools |
|
|
|
Holder Collision Detection |
|
|
|
Toolpath Editing |
STD |
4th Axis |
PRO |
Toolpath Graphical Editing |
|
|
|
Toolpath Instancing |
|
|
|
Toolpath Arc Fitting |
|
|
|
Post Processor Generator |
STD |
4th Axis |
PRO |
Customizable Post Generator |
|
|
|
Simulate Cycles |
|
|
|
Arc Output |
|
|
|
Helix Output |
|
|
|
Spiral Output |
|
|
|
5 Axis Output (Extra Cost) |
|
|
|
Miscellaneous |
STD |
4th Axis |
PRO |
HTML Based Shop Documentation |
|
|
|
Knowledge Base |
|
|
|
Fixture Offset Programming |
|
|
|
Check Surface Boundary Creation |
|
|
|
Tool Silhouette Boundary Creation |
|
|
|
Tool Double Contact Boundary Creation |
|
|
|
Tool Holder Collision Boundary Creation |
|
|
|
Utilities |
STD |
4th Axis |
PRO |
G-Code Editor & Analysis Tool |
|
|
|
DNC for single port |
|
|
|